linux 云主机系统添加和删除IP,批量添加IP

[复制链接] |主动推送
查看25 | 回复0 | 2024-9-11 15:00:37 | 显示全部楼层 |阅读模式
首先输入root,密码进入

再查看IP网卡,命令:ifconfig
xinknat# ifconfig
显示:
eth0      Link encap:Ethernet  HWaddr 00:30:18:A1:A9:4A
          inet addr:98.126.33.66  Bcast:98.126.33.71  Mask:255.255.255.248
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:92139669 errors:0 dropped:0 overruns:0 frame:0
          TX packets:99505579 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3484683143 (3.2 GiB)  TX bytes:476753694 (454.6 MiB)
          Interrupt:30 Base address:0xe000
eth0:0    Link encap:Ethernet  HWaddr 00:30:18:A1:A9:4A
          inet addr:98.126.33.67  Bcast:98.126.33.71  Mask:255.255.255.248
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:30 Base address:0xe000
eth0:1    Link encap:Ethernet  HWaddr 00:30:18:A1:A9:4A
          inet addr:98.126.33.68  Bcast:98.126.33.71  Mask:255.255.255.248
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:30 Base address:0xe000
lo        Link encapocal Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:38 errors:0 dropped:0 overruns:0 frame:0
          TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2068 (2.0 KiB)  TX bytes:2068 (2.0 KiB)


输入:"  ifconfig eth0:2 98.126.33.69 netmask 255.255.255.248 up "
再输入:“vi /etc/sysconfig/network-scripts/ifcfg-eth0:2  "

DEVICE=eth0:2
ONBOOT=yes
BOOTPROTO=static
IPADDR=98.126.33.69


保存,按Esc退出,输入" : wq "在输入"shift+! "然后回车成功。
重启网络让IP生效: service network restart
cat /etc/sysconfig/network-scripts/eth0:2    查看更改生效了不
附删除ip方法
代码:
ifconfig eth0:2 98.126.33.69 netmask 255.255.255.248 down
rm /etc/sysconfig/network-scripts/ifcfg-eth0:2
------------------------------------
1.添加虚拟ip
    ifconfig eht0:1 192.168.100.22 netmask 255.255.255.0
    2. 删除刚才添加的虚拟IP
    ip addr del 192.168.100.22/24 dev eth0
--------------------------------------------------
单网卡批量添加不同IP段
70.39.112.194 添加IP:70.39.112.195-222/70.39.83.226-254
代码:
vi /etc/sysconfig/network-scripts/ifcfg-eth0-range0
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR_START=70.39.112.195
IPADDR_END=70.39.112.222
CLONENUM_START=0
GATEWAY=70.39.112.193
NETMASK=255.255.255.224
NO_ALIASROUTING=yes


service network restart  #重启网卡


-------------------------------------------------------------
ifconfig 后 看到 IP:70.39.112.195-222 对应网卡号:eth0:0-eth0:27,
所以再批量添加IP,网卡从eth0:28以后开始就行,
网卡eth0不变,创建新文件:ifcfg-eth0-range1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


vi /etc/sysconfig/network-scripts/ifcfg-eth0-range1
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR_START=70.39.83.226
IPADDR_END=70.39.83.254
CLONENUM_START=28
GATEWAY=70.39.83.225
NETMASK=255.255.255.224
NO_ALIASROUTING=yes


重启网络让IP生效: service network restart
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则